Skip to content

Leaf Beater Upgrade Screen

Add to Quote

UPGRADE FOR LOW MAINTENANCE WITH SUPERIOR PERFORMANCE

Upgrade the Leaf Beater® Original Rain Head with an Upgrade Screen incorporating patented Clean Shield™ technology. Clean Shield™ technology incorporates single screen technology and ensures debris is directed away from the flow of water and off the rain head’s screen.

The Upgrade Screens will increase flow rates and enhance catchment efficiency. Minimal maintenance is required as the Clean Shield™ screen automatically sheds debris.

Features and Benefits

  • Fits Leaf Beater® Original.
  • Patented single screen technology for advanced debris shedding (Clean Shield™ technology)
  • Easy to install and minimal maintenance.
  • Enhances catchment efficiency by deflecting debris out of the flow of water.
  • A single mosquito proof stainless steel mesh screen with a 0.955mm aperture.
  • Increases flow rate performance.

Installation Instructions

  1. Remove both the primary and secondary screen from your Leaf Beater Original® Rain Head. Discard these as they are no longer required.
  2. Ensure that the Leaf Beater® Original Rain Head is free from leaves and debris.
  3. Insert the new Leaf Beater® Original upgrade screen into the rain head at an angle (figure 1) until the front rubber channel (red) is nearly over the front lip (green) of the body. Tip: Wetting the rubber seal will help the screen slide into place.
  4. Fix the front of the Leaf Beater® Original screen into place (figure 2) by sliding the rubber channel (red) over the front lip (green) of the body.
  5. Reaching toward the back of the Leaf Beater® Original upgrade screen push down on the plastic frame (figure 3) so that the rear edge (red) is below the lowest notch (green) and firmly against the back wall of the Leaf Beater® Original.
Other Details
Height:176mm
Width:180mm
Length:211mm